|
Post by account_disabled on Dec 9, 2023 6:31:20 GMT 1
块上变频器或 BUC 用作将来自调制解调器的低频无线电信号转换为高频信号以传输到卫星的设备。其应用包括将数据从地面单元传输到地球轨道上的卫星,然后再次重定向到卫星下行链路传输中位于单独位置的另一个地面单元。 大多数 BUC 使用锁相环本地振荡器来维持正确的传输频率,并且还需要外部 10 MHz 频率。块上转换器用于互联网接入的通信广播系统、电视以及天气系统以及政府机构的其他数据传输要求,因为使用 BUC 的卫星传输非常适合两个或多个地面无线电位置之间的长距离通信。 块上变频器的工作原理 L 波段中表示数据的较低频率波段被转换为较高 香港数据库 频率波段,使它们能够传播到更远的太空,直至卫星或航天器。每组数据通过覆盖不同频率的不同频段来区分。 频段之间的比较 L 频段频率转换到的主要频段有五个,即 S、C、X、Ku、Ka。BUC 用于将频率从 L 频段转换到任何所需频段。 Around the Web网络周围 赞助 当神经病发作时,试试这个(真是天才!) When Neuropathy Hits, Try This (It's Genius!)当神经病发作时,试试这个(真是天才!) WellnessGaze健康凝视 Ka 频段 Ku 频段通常用于宽带数据,这两个频段分别指 K 频段以上和 K 频段以下的频率。 C 频段最常用于电视和互联网广播系统等长距离通信。 Raditek 提供上述所有 BUC,他们甚至还提供根据您的需求开发的定制产品。块上变频器通常与 LNB(低噪声块转换器)(也由 Raditek 提供)结合使用,其中 LNB 是下变频设备,在同时使用 BUC 和 LNB 的系统中充当接收侧。 Raditek 还可以根据您的要求批量提供产品。他们还为所有产品提供保修。在购买 Block Up Converter 之前,请查看网站上的完整目录,了解产品规格。 010000 Peter Corbett 是一位撰稿人,他在这里描述了一种卫星通信块上变频器。
|
|